LEDBAR LEDSON ORBIX+ DUO 21" 180W

CODE: 91206T

LEDBAR LEDSON ORBIX+ DUO 21" 180W

The Orbix+ position light ignites with a unique fluid motion that guides the light from one side of the bar to the other before lighting up. A dynamic sequence that makes you stand out from the crowd and elevates your vehicle's appearance to a whole new level.

The bar is E-marked according to ECE R149 and has a Drive beam pattern that optimally enhances your vehicle's existing high beam to reach both longer and wider. Of course, you can choose to have your position light in modern cool white or a rawer amber.

A high IP69K rating and aluminum housing with polycarbonate lens ensure Orbix+ gives you a safer drive and a better look, of course with Ledson's unbeatable 36 month warranty.

Driving Beam light pattern

Driving Beams reflectors are all computer generated and manufactured to provide a similar light image as combo. It mimics and enhances the car's existing headlight and light pattern.

Mounting on the vehicle: Can be mounted directly on the vehicle (drill in a suitable place) or a little smoother and nicer with the help of a number plate holder or pipe bracket. See our different accessories for mounting options. NOTE: specially adapted holder is available for this LED bar here: Holder for Orbix+ Duo 21". 

Features:

Position light with dynamic ignition, which means that it lights up with a motion pattern

Selectable position light, white or amber

E-mark ECE R149/R10

”Driving beam” light pattern (wide and elongated)

Range 590 m at 1 lux

15120 lumen (raw), 13500 lumen (effective)

Color temperature 5700K (cool white)

Two mounting options

Technical data:

180 W (36 x 5 W LED)

Voltage: 10-32V

IP69K (water / dust-tight)

Aluminum casing and polycarbonate lens

DT-connector (included)

Supplied:

Orbix+ 21" dual row LED bar

Side mounted feet

Slideable brackets (standing/hanging)

Bolts and screws to attach the bar to the desired surface

DT connector

Installation instructions

Dimensions & weight:

Width: 537 mm

Height: 63 mm

Depth: 70 mm

Weight: 2,91 kg

NOTE: The DT connector must not be cut as it entails an increased risk of moisture damage and the warranty then ceases to apply. DT connector (male) with joint is included with the product.