LEDBAR LEDSON EPIX20+ Strobe 20" 180W Powerboost

CODE: 91294T

Give yourself the best. Epix+ stands out with its self-developed sporty design, created with today's modern cars in mind. Certified R65 warning lights ensure visibility, and the globally unique position light is fully integrated with the reflector.

Dynamic ignition of position lights. Everything you need and want from a LEDBAR lamp can be found in Epix+. We've maximized performance in E homologation mode, with a Powerboost option when you decide to go off-road. Approved R65 strobe lights ensure visibility when working on the road and safety regardless of the weather or season. The intelligent mounts we have developed ensure easy installation in almost any place in the vehicle, regardless of your preferences.

Epix+ is for those who want a futuristic experience. The belt design was developed by Ledson and is in harmony with the most modern cars, taking your vehicle to the next level. Its dynamic position light turns on with a powerful motion that carefully directs the light from one side of the stick to the other before fully illuminating. The position light is integrated into the headlight, which is a completely unique feature that makes you stand out even more.

Powerboost: how much light do you want? As if that wasn't enough, you also have the option of using Powerboost. Simply tighten or loosen the screw on the back of the LED strip to switch between E-approved mode and Powerboost 'offroad' mode for situations where you need maximum brightness on the road.

Driving Beam Light Pattern All Driving Beams reflectors are computer generated and manufactured to provide a similar light pattern to the combo. Imitates and enhances your car's existing headlights and light pattern.

Features and specifications:

R65 approved strobe lights with 10 different strobe patterns

Position light with unique dynamic ignition, integrated with the reflector

Possibility to choose the position light in white xenon or yellow-orange

High beam light arrangement (wide and longitudinal)

E marking R112, R7, R10 (EMC marking)

Range: 458 m (1 lux), Powerboost: 530 m (1 lux)

15,500 lumens (theoretical), 11,800 lumens (actual)

Color temperature 5000K (xenon white)

180W (12 LEDs 15W)

Voltage: 9-36V IP69K (water/dustproof)

Aluminum housing and polycarbonate lens

Side reflective optics

Pressure equalizing membrane

Electronic heat management

DT connector (included)

The set includes: Epix20+ Strobe 20" LED strip with Powerboost function

Bolts and screws to attach the bar to a suitable surface

Installation instructions

DT 6-pin cable

Dimensions and weight (without mounting): Width: 510 mm Height: 43 mm Depth: 61 mm Weight: 1.86 kg

Flash patterns: Single flash sync: 2.2 Hz Single asynchronous flash: 2.2 Hz Triple flash sync: 1.1 Hz Triple asynchronous flash: 1.1 Hz Quad flash sync: 1.25 Hz Asynchronous quad flash: 1.25 Hz Combination of one long and five short asynchronous: 0.83 Hz Combination of one long and five short asynchronous: 0.83 Hz Synchronization of a series of flashes: 10 Hz A series of asynchronous flashes: 10 Hz

NOTE: Do not cut the DT connector as this increases the risk of moisture damage and will void the warranty.